LF Cast Chassis / Neo

Celestion
Please wait
OEM

NTR06-17X

NTR06-17X
NTR06-17X

Features


  • 6.5" neodymium magnet woofer providing 150Wrms (AES standard) power handling and 93.5dB sensitivity
  • 1.75" high temperature copper clad aluminium voice coil
  • Optimized flux distribution in magnet assembly provides low harmonic distortion
  • Half-roll elastomer surround provides greater excursion and improved modal distribution
  • Intelligent heat management in both chassis and magnet assembly design offers reduced thermal compression
  • Water-resistant Kevlar-loaded cone
  • Space efficient chassis profile

Frequency Response and Impedance Curves

Product Graph
1. Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
2. Continuous Power Handling is defined as 3dB greater than the AES rating.
3. Measured on axis at 1W, 1m in 2π anechoic environment. 
4. Xmax derived from: (voice coil winding width-gap depth)/2. 
5. Small signal parameters measured after unit subjected to pre-conditioning signal.

General Specifications

Nominal diameter
165mm/6.5in
Power rating1
150Wrms
Continuous power rating2
300W
Nominal impedance
Sensitivity3
93.5dB
Frequency range
70-5000Hz
Voice coil diameter
45mm/1.75in
Chassis type
Cast aluminium
Magnet type
Neodymium
Coil material
Copper clad aluminium
Former material
Polyimide
Cone material
Kevlar loaded paper with weather resistant coating
Surround material
Elastomer
Suspension
Single
Xmax4
3mm/0.12in
Gap depth
6mm/0.24in
Voice coil winding width
12mm/0.47in

Small Signal Parameters5

D
0.14m/5.51in
Fs
61.2Hz
Mms
16.399g/0.58oz
Qms
8.234
Qes
0.34
Qts
0.327
Re
5.32Ω
Vas
13.817lt/0.49ft3
BI
9.93Tm
Cms
0.412mm/N
Rms
0.766kg/s
Le (at 1kHz)
0.33mH

Mounting Information

Overall diameter
Max 185mm/7.3in
Overall depth
73mm/2.87in
Cut-out diameter
145mm/5.7in
Mounting slot dimensions
Ø10mm/0.39in
Number of mounting slots
4
Mounting slot PCD range
170mm/6.7in
Unit weight
1.2kg/2.64lb