Compression Drivers / Neo

Celestion
Please wait
Buy Now

CDX14-2420

CDX14-2420
CDX14-2420

  • 1.4" exit, neodymium magnet, 60mm (2.4") voice coil compression driver provides 70Wrms (AES standard) power handling and 106.5dB sensitivity
  • Patented phase plug design method suppresses cavity resonances at higher frequencies
  • Titanium diaphragm, deep drawn to increase stiffness and reduce distortion
  • Lower compression ratio reduces air non-linearity and allows for higher maximum SPL
  • Rolled polyimide surround improves stiffness control, further lowering distortion
  • Curved coherent wavefront, optimised for horn loading

16Ω Frequency Response and Impedance Curves

Product Graph
  1. Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
  2. Continuous Power Handling is defined as 3dB greater than the AES rating.
  3. Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.

General Specifications

Power rating1
70Wrms
Continuous power rating2
140W
Nominal impedance
Sensitivity3
106.5dB
Frequency range
800-20,000Hz
Recommended min. crossover (12dB/oct)
1200Hz
Voice coil diameter
60mm/2.4in
Voice coil material
Edgewound copper clad aluminium
Magnet type
Neodymium
Diaphragm material
Titanium
Surround material
Polyimide

Mounting Information

Maximum width
116mm/4.6in
Depth
56mm/2.2in
Weight
1.5kg/3.3lb
Fitting
Flange (4 x M6 holes on 102mm/4in PCD)
Throat exit
35.6mm/1.4in

Packed Dimensions & Weight

Single pack size W x D x H
172mm x 135mm x 69mm
/6.8in x 5.3in x 2.7in
Single pack weight
1.8kg/3.9lb
Multi pack size W x D x H
500mm x 365mm x 90mm
/19.7in x 14.4in x 3.5in
Multi pack weight
11.5kg/25.3lb