Midrange
Coaxial/Twin Cone
- TF1218TC
- TF1225CX
Compact Array
- AN2075
- AN2775
- AN3510
Compression Drivers / Ferrite
- CDX1-1010
- CDX1-1440
- CDX1-1445
- CDX1-1446
- CDX1-1745
- CDX1-1746
- CDX1-1747
- CDX14-3060
- CDX20-3075
Compression Drivers / Neo
- CDX1-1415
- CDX1-1425
- CDX1-1430
- CDX1-1720
- CDX1-1730
- CDX1-1731
- CDX14-2420
- CDX14-3050
- CDX20-3000
Horns
- H1-7050 'NoBell'
- H1-9040P
LF Cast Chassis / Ferrite
- CF18VJD
- CF1830E
- CF1840JD
- FTR08-2011D
- FTR12-3070C
- FTR12-4080HDX
- FTR15-3070C
- FTR15-3070E
- FTR15-4080HD
- FTR15-4080HDX
- FTR15-4080F
- FTR15-4080FD
- FTR18-4080F
- FTR18-4080FDX
- FTR18-4080HDX
- FTR18-4080FD
LF Cast Chassis / Neo
- NTR06-1705D
- NTR08-2009D
- NTR08-2011D
- NTR10-2016D
- NTR10-2520D
- NTR10-2520E
- NTR12-3018D
- NTR15-3018E
- NTR21-5010JD
LF Pressed Chassis / Ferrite
- TF0510
- TF0615
- TF0818
- TF1015
- TF1018
- TF1020
- TF1215
- TF1218
- TF1220
- TF1225e
- TF1225
- TF1230
- TF1230SL
- TF1520
- TF1525
- TF1525e
- TF1530SL
- TF1530
- TF1530e
- K12H-100TC
- K12H-200TC
LF Pressed Chassis / Neo
- TN0820
- TN1020
- TN1225
- TN1230
- TN1525
- TN1530
Midrange
- TF0410MR
- TF0510MR
- TF0615MR
- TF0818MR
- NTR06-1705B
Features
- 6.5" neodymium magnet mid-range driver providing 150Wrms (AES standard) power handling and 95dB sensitivity
- 1.75" high temperature copper clad aluminium voice coil
- Suitable for line array applications, utilising a space efficient chassis profile
- FEA optimised flux distribution in the magnet assembly provides low harmonic distortion
- "M-Roll" surround provides progressive excursion control, generating a smooth frequency response
- Intelligent heat management in both chassis and magnet assembly design offers reduced thermal distortion
8Ω Frequency Response
- Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
- Measured on axis at 1W, 1m in 2π anechoic environment.
- Xmax derived from: (voice coil winding width-gap depth)/2.
- Small signal parameters measured after unit subjected to pre-conditioning signal.
General Specifications
Chassis type
Cast aluminium
Coil material
Copper clad aluminium
Cone material
Kevlar loaded paper
Former material
Polyimide
Frequency range
150-7000Hz
Gap depth
6mm/0.24in
Magnet type
Neodymium
Nominal diameter
165mm/6.5in
Nominal impedance
8Ω
Power rating1
150Wrms
Sensitivity2
95dB
Surround material
Cloth-sealed
Suspension
Single
Voice coil diameter
45mm/1.75in
Voice coil winding width
11mm/0.43in
Xmax3
2.5mm/0.098in
Small Signal Parameters4
D
0.13m/5.12in
Fs
109.6Hz
Mms
12.934g/0.457oz
Mmd
12.069g/0.422oz
Qms
2.632
Qes
0.527
Qts
0.439
Re
5.95Ω
Vas
4.06lt/0.14ft3
BI
10.03Tm
Cms
0.163mm/N
Rms
3.385kg/s
Le (at 1kHz)
0.24mH
Mounting Information
Cut-out diameter
150mm/5.9in
Diameter
Max 189mm/7.44in - Min 162mm/6.38in
Mounting PCD range
173.5mm/6.83in
Mounting slot dimensions
6.5mm x 5.5mm/0.26in x 0.22in
Number of mounting slots
4
Overall depth
71mm/2.79in
Unit weight
0.85kg/1.87lb
Packed Dimensions & Weight
Multipack (140) size W x D x H
1070mmx850mmx860mm
/42.1in x 33.5in x 33.9in
Multipack (140) weight
160kg/352lb
Single pack size W x D x H
190mm x 190mm x 110mm
/7.5in x 7.5in x 4.3in
Single pack weight
1.0kg/2.2lb
