LF Cast Chassis / Ferrite

Celestion
Please wait
Buy Now

FTR15-4080HDX

FTR15-4080HDX
FTR15-4080HDX

  • 15" ferrite woofer provides 1000Wrms (AES standard) power handling and a frequency response of 40Hz-2500Hz
  • 4" high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
  • Double suspension and a “multi-roll” surround provide exceptional linearity at extremes of cone excursion
  • Intelligent heat management in both chassis and magnet assembly design further minimizes distortion
  • Less than 10kg – very low weight for this product class

8Ω Frequency Response and Impedance Curves

Product Graph
  1. Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
  2. Continuous Power Handling is defined as 3dB greater than the AES rating.
  3. Measured on axis at 1W, 1m in 2π anechoic environment.
  4. Xmax derived from: (voice coil winding width-gap depth)/2.
  5. Small signal parameters measured after unit subjected to pre-conditioning signal.

General Specifications

Nominal diameter
381mm/15in
Power rating1
1000Wrms
Continuous power rating2
2000W
Nominal impedance
Sensitivity3
96dB
Frequency range
40-2500Hz
Voice coil diameter
100mm/4in
Chassis type
Cast aluminium
Magnet type
Ferrite
Magnet weight
3.1kg/110oz
Coil material
Round copper
Former material
Glass fibre
Cone material
Glass loaded paper with weather-resistant
impregnation
Surround material
Cloth-sealed
Suspension
Double
Xmax4
8mm/0.33in
Gap depth
9.5mm/0.37in
Voice coil winding width
25mm/0.99in

Small Signal Parameters4

D
0.33m/12.99in
Fs
40.5Hz
Mms
153.53g/5.42oz
Qms
3.98
Qes
0.36
Mmd
139.38g/4.92oz
Qts
0.33
Re
5.10Ω
Vas
104.27lt/3.68ft3
BI
23.53Tm
Cms
0.10mm/N
Rms
9.81kg/s
Le (at 1kHz)
1.8mH

Mounting Information

Overall diameter
385mm/15.16in
Overall depth
180mm/7.1in
Cut-out diameter
351mm/13.82in
Mounting slot dimensions
10mm x 7mm/0.39in x 0.27in
Number of mounting slots
8
Mounting PCD range
365-375mm/14.37-14.76in
Unit weight
9.7kg/21.3lb

Packed Dimensions & Weight

Single pack size W x D x H
435mm x 435mm x 200mm
/17.1in x 17.1in x 7.9in
Single pack weight
11.5kg/25.4lb
Multi pack size W x D x H
1210mmx1050mmx980mm
/47.6inx41.3inx35.4in
Multi pack weight
380kg/836lb