TF1018
10-inch pressed steel chassis, ferrite magnet mid/bass driver
Legacy Product
- 10in speaker drive providing 96dB sensitivity and 100Wrms
Specifications
10in
Diameter
200W
Continuous power rating
8Ω
Rated impedance
96dB
Sensitivity
Nominal diameter
254mm / 10in
Power rating
100W
Continuous power rating
200W
EIA power rating
150W
Rated impedance
8Ω
Sensitivity
96dB
Frequency range
70-6000Hz
Chassis type
Pressed steel
Magnet type
Ferrite
Magnet weight
0.88kg / 31oz
Voice coil diameter
44mm / 1.75in
Voice coil material
Round copper
Former material
Polyimide
Cone material
Kevlar loaded paper
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
6mm / 0.24in
VC winding height (Hvc)
10mm / 0.39in
Parameters
Sd
346.36cm2 / 53.69in2
Fs
70.10Hz
Mms
25.91g / 0.91oz
Qms
2.426
Qes
0.493
Qts
0.409
Re
5.80Ω
Vas
33.81I / 1.19ft3
BI
11.59Tm
Cms
0.20mm/N
Rms
4.70kg/s
Le (at 1kHz)
0.50mH
Xmax
2mm / 0.08in
Mounting Information
Overall diameter
256mm / 10.08in
Overall depth
102mm / 4.0in
Cut-out diameter
229mm / 9.02in
Mounting hole dimensions
8x6mm / 0.31x0.24in
Number of mounting holes
4
Mounting hole PCD
245mm / 9.65in
Unit weight
2.4kg / 5.3lb
Packed Dimensions & Weight
Single pack size W x D x H
280mm x 280mm x 120mm / 11.0in x 11.0in x 4.7in
Single pack weight
3.0kg / 6.6lb
Multi pack qty
96
Multi pack size W x D x H
1080mm x 880mm x 840mm / 42.5in x 34.6in x 33.1in
Multi pack weight
265kg / 585lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: Hvc-Hg/2
