Compact Array

Celestion
Please wait
Buy Now

AN3510

AN3510
AN3510

Features

  • Compact and lightweight, full-range neodymium loudspeakers
  • Advanced Finite Element Analysis techniques used for acoustic, mechanical and electromagnetic modelling
  • Ideal for applications such as portable line arrays where actively controlled wavefront (beam steering) is used
  • Delivers wider dispersion to higher frequencies than many equivalent compact, full-range drivers on the market
  • Chassis purpose-designed for maximum free air movement, with square mounting frame to facilitate close coupling of multiple units
  • Stiff and light aluminium cone remains rigid to higher frequencies, delivering a smoother response in the critical listening band
  • Half roll elastomer surround provides damping for unwanted resonances and sustained centring control at extremes of excursion
  • Designed to be weather resistant for outdoor applications

8Ω Frequency Response

Product Graph
  1. Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
  2. Measured on axis at 1W, 1m in 2π anechoic environment.
  3. Xmax derived from: (voice coil winding width-gap depth)/2.

General Specifications

Nominal diameter
88mm/3.5in
Power rating1
35Wrms
Nominal impedance
Sensitivity2
87dB
Frequency range
98Hz-18.5kHz
Voice coil diameter
25mm/1.0in
Chassis type
Glass reinforced ABS
Magnet type
Neodymium
Coil material
Round Copper
Former material
Polyimide
Cone material
Aluminium
Surround material
Elastomer
Xmax3
1.25mm/0.04in
Gap depth
4mm/0.14in
Voice coil winding width
6.5mm/0.23in
Voice coil material
Round Copper
Voice coil former material
Polyimide
Bandwidth
125Hz-20kHz

Small Signal Parameters

Sd
38.48cm2/5.98in2
D
70mm/2.76in
Fs
98Hz
Mms
3.37g/0.12oz
Qms
6.59
Qes
0.66
Qts
0.67
Re
5.73Ω
Vas
1.3lt/0.046ft3
BI
4.5Tm
Cms
0.62mm/N

Mounting Information

Overall depth
50mm/2in
Overall size
89.3 x 89.3mm/3.52in x 3.52in
Cut-out diameter
78.8mm/3.1in
Fitting
4 x M4 holes
Mounting PCD range
Ø104mm/4.1in
Unit weight
160g/5.65oz