CDX20-3000
2-inch exit neodymium magnet compression driver
Legacy Product
- 800Hz recommended min. crossover freq (12dB/oct)
- Maximum modal suppression phase plug
- Deep-drawn titanium diaphragm with polyimide surround
Specifications
150W
Continuous power rating
8Ω
Rated impedance
107dB
Sensitivity
Power rating
75W
Continuous power rating
150W
Rated impedance
8Ω
Sensitivity
107dB
Frequency range
500-18,000Hz
Recommended min. crossover (12dB/oct)
800Hz
Magnet type
Neodymium
Voice coil diameter
75mm / 3in
Voice coil material
Edgewound copper clad aluminium
Diaphragm material
Titanium
Surround material
Polyimide
Additional impedances
16Ω
Mounting Information
Width
125mm / 5in
Depth
94mm / 3.7in
Fitting
Bolt (4 x M6 holes on 102mm/4in PCD)
Throat exit
50mm / 2in
Unit weight
2.4kg / 5.3lb
Packed Dimensions & Weight
Single pack size W x D x H
140mm x 135mm x 112mm / 5.5in x 5.3in x 4.4in
Single pack weight
2.4kg / 5.3lb
Multi pack qty
6
Multi pack size W x D x H
500mm x 365mm x 145mm / 19.7in x 14.4in x 5.7in
Multi pack weight
13.5kg / 29.7lb
Repair kits
T5526
Diaphragm repair kit (8Ω)
T5538
Diaphragm repair kit (16Ω)
Frequency Response and Impedance Curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.
