NTR12-3018D
12-inch cast aluminium chassis, neodymium magnet LF driver
Legacy Product
- Vented cast aluminium heatsink
- Compact high flux Dual Magnet Motor design
Specifications
12in
Diameter
700W
Continuous power rating
8Ω
Rated impedance
98dB
Sensitivity
Nominal diameter
305mm / 12in
Power rating
350W
Continuous power rating
700W
Rated impedance
8Ω
Sensitivity
98dB
Frequency range
50-4000Hz
Chassis type
Cast aluminium
Magnet type
Neodymium
Voice coil diameter
75mm / 3in
Voice coil material
Round copper
Former material
Glass fibre
Cone material
Kevlar loaded paper
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
8mm / 0.32in
VC winding height (Hvc)
16mm / 0.63in
Parameters
Sd
530.93cm2 / 82.29in2
Fs
58.80Hz
Mms
58.08g / 2.05oz
Qms
3.391
Qes
0.325
Qts
0.296
Re
5.99Ω
Vas
50.39l / 1.78ft3
BI
19.90Tm
Cms
0.13mm/N
Rms
6.32kg/s
Le (at 1kHz)
0.80mH
Xmax
4mm / 0.16in
Mounting Information
Overall diameter
318mm / 12.5in
Overall depth
137mm / 5.4in
Cut-out diameter
286mm / 11.26in
Mounting hole dimensions
9.5x6.5mm / 0.37x0.26in
Number of mounting holes
8
Mounting hole PCD
298-304mm / 11.7-12.0in
Unit weight
2.6kg / 5.7lb
Packed Dimensions & Weight
Single pack size W x D x H
350mm x 350mm x 185mm / 13.8in x 13.8in x 7.3in
Single pack weight
3kg / 6.6lb
Multi pack qty
60
Multi pack size W x D x H
1080mm x 980mm x 880mm / 42.5in x 38.6in x 34.6in
Multi pack weight
178kg / 392lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: Hvc-Hg/2
