TFX0512 (Legacy)
5-inch pressed steel chassis, ferrite magnet coaxial driver
- Silk dome tweeter
- Integrated HF waveguide
- 100° nominal HF coverage
Specifications
5in
Diameter
200W
Continuous power rating
8Ω
Rated impedance
92dB
Sensitivity
Nominal diameter
125mm / 5in
Power rating
100W
Continuous power rating
200W
Rated impedance
8Ω
Sensitivity
92dB
Frequency range
70-4000Hz
Chassis type
Pressed steel
Magnet type
Ferrite
Magnet weight
0.48kg / 17oz
Voice coil diameter
32mm / 1.25in
Voice coil material
Round copper
Former material
Polyimide
Cone material
Kevlar loaded paper
Surround material
Elastomer
Suspension
Single
Gap height (Hg)
6mm / 0.24in
VC winding height (Hvc)
12mm / 0.47in
Parameters
Sd
78.54cm2 / 12.17in2
Fs
69.10Hz
Mms
8.60g / 0.30oz
Qms
6.184
Qes
0.494
Qts
0.457
Re
5.45Ω
Vas
5.38I / 0.19ft3
BI
6.42Tm
Cms
0.62mm/N
Rms
0.60kg/s
Le (at 1kHz)
0.37mH
Xmax
3.25mm / 0.13in
Mounting Information
Overall diameter
151mm / 5.9in (max)
Overall depth
72mm / 2.8in
Cut-out diameter
116mm / 4.6in
Mounting hole dimensions
4.5mm / 0.18in Ø
Number of mounting holes
4
Mounting hole PCD
140mm / 5.5in
Unit weight
2kg / 4.4lb
Packed Dimensions & Weight
Multi pack qty
60
Multi pack size W x D x H
742mm x 287mm x 300mm / 29.2in x 11.3in x 11.8in
Multi pack weight
125kg / 275lb
Additional HF Specifications
Power rating
8W
Continuous power rating
16W
Rated impedance
8Ω
Sensitivity
97dB
Frequency range
2000-20,000Hz
Recommended min. crossover 12dB/oct
2500Hz
Voice coil diameter
19mm / 0.75in
Magnet type
Neodymium
Diaphragm material
Silk
Surround material
Silk
Frequency Response and Impedance Curves
Black: LF response curve | Red: HF response curve
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
HF power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Xmax: Hvc-Hg/2
Suggested crossover designs available at celestion.com/blog
