TF1225
12-inch pressed steel chassis, ferrite magnet bass/mid driver
Specifications
500W
Continuous power rating
97dB
Sensitivity
2.5in
Voice coil diameter
Nominal diameter
305mm / 12in
Power rating
250W
Continuous power rating
500W
EIA power rating
400W
Rated impedance
8Ω
Sensitivity
97dB
Frequency range
50-4000Hz
Chassis type
Pressed steel
Magnet type
Ferrite
Magnet weight
1.2kg / 42oz
Voice coil diameter
64mm / 2.5in
Voice coil material
Round copper
Former material
Polyimide
Cone material
Kevlar loaded paper
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
8mm / 0.31in
VC winding height (Hvc)
13mm / 0.51in
Additional impedances
4Ω
Parameters
Sd
530.93cm2 / 82.29in2
Fs
55.60Hz
Mms
48.52g / 1.71oz
Qms
3.112
Qes
0.420
Qts
0.370
Re
5.08Ω
Vas
67.27l / 2.38ft3
BI
14.32Tm
Cms
0.17mm/N
Rms
5.45kg/s
Le (at 1kHz)
0.86mH
Xmax
4.5mm / 0.18in
Mounting Information
Overall diameter
309mm / 12.17in
Overall depth
130mm / 5.1in
Cut-out diameter
283mm / 11.14in
Mounting hole dimensions
7.9mm / 0.31in Ø
Number of mounting holes
4
Mounting hole PCD
297mm / 11.69in
Unit weight
4.1kg / 9.0lb
Packed Dimensions & Weight
Single pack size W x D x H
330mm x 330mm x 150mm / 13in x 13in x 5.9in
Single pack weight
4.6kg / 10.1lb
Multi pack qty
60
Multi pack size W x D x H
1080mm x 980mm x 880mm / 42.5in x 38.6in x 34.6in
Multi pack weight
280kg / 615lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: 0.5*(Hvc-Hg) + 0.25*Hg
Watch
Speaker Cab Upgrade: TF1225/CDX1-1747
