Compact Array

Celestion
Please wait
Buy Now

AN2075

AN2075
AN2075

Features

  • Square chassis profile for close coupling
  • Integrated waveguide for greater HF dispersion
  • Rigid aluminium cone
  • Half roll elastomer surround
  • Weatherproof

Frequency Response and Impedance Curves

Product Graph
  1. Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
  2. Continuous Power Rating is defined as 3dB greater than the AES rating
  3. Measured on axis at 1W, 1m in 2Π anechoic environment.
  4. Xmax derived from: (voice coil winding width-gap depth)/2.
  5. Small signal parameters measured after unit subjected to pre-conditioning signal

General Specifications

Nominal diameter
50mm/2in
Power rating1
20Wrms
Continuous power rating2
40W
Nominal impedance
Sensitivity3
82dB
Frequency range
160Hz-19kHz
Voice coil diameter
20mm/0.75in
Chassis type
Glass reinforced ABS
Magnet type
Neodymium
Voice coil material
Round Copper
Former material
Polyimide
Cone material
Aluminium
Surround material
Elastomer
Xmax4
1.5mm/0.06in
Gap depth
3mm/0.12in
Voice coil winding width
6mm/0.24in

Small Signal Parameters

D
40mm/1.57in
Sd
12.56cm2/1.95in2
Fs
153.4Hz
Mms
1.49g/0.05oz
Qms
5.281
Qes
0.998
Qts
0.839
Re
0.84Ω
Vas
1.51l/0.05ft3
BI
2.71Tm
Cms
0.72mm/N

Mounting Information

Overall depth
43.5mm/1.7in
Overall size
56.2 x 56.2mm/2.2in x 2.2in
Cut-out diameter
51.1mm/2.0in
Fitting
4 x M4 holes
Mounting PCD range
62mm/2.45in
Unit weight
97g/3.4oz

Packed Dimensions & Weight

Single pack size W x D x H
90mm x 90mm x 65mm
/3.5in x 3.5in x 2.6in
Single pack weight
200g/0.4lb
Multi pack size W x D x H
450mm x 350mm x 380mm
/17.6in x 13.8in x 15in