AN3510
3.5-inch neodymium magnet compact full range driver
- Square chassis profile for close coupling
- Rigid aluminium cone
- Half roll elastomer surround
- Weatherproof
Specifications
70W
Continuous power rating
87dB
Sensitivity
1in
Voice coil diameter
Nominal diameter
88mm / 3.5in
Power rating
35W
Continuous power rating
70W
Rated impedance
8Ω
Sensitivity
87dB
Frequency range
98-18,500Hz
Chassis type
Glass reinforced ABS
Magnet type
Neodymium
Voice coil diameter
25mm / 1in
Former material
Polyimide
Cone material
Aluminium
Surround material
Elastomer
Suspension
Single
Gap height (Hg)
4mm / 0.14in
VC winding height (Hvc)
6.5mm / 0.23in
Additional impedances
16Ω
Parameters
Sd
38.45cm2 / 5.9in2
Fs
113.4Hz
Mms
3.76g / 0.13oz
Qms
5.093
Qes
0.740
Qts
0.646
Re
5.73Ω
Vas
1.87l / 0.07ft3
BI
4.56Tm
Cms
0.52mm/N
Rms
0.53kg/s
Le (at 1kHz)
0.14mH
Xmax
2.25mm / 0.09in
Mounting Information
Overall size
89.3x89.3mm / 3.52x3.52in
Overall depth
50mm / 2in
Cut-out diameter
78.8mm / 3.1in
Fitting
4 x M4 holes
Mounting hole PCD
104mm / 4.1in
Unit weight
0.16kg / 0.35lb
Packed Dimensions & Weight
Single pack size W x D x H
115mm x 115mm x 70mm / 4.5in x 4.5in x 2.8in
Single pack weight
250g / 0.6lb
Multi pack qty
72
Multi pack size W x D x H
460mm x 635mm x 455mm / 18.1in x 25in x 17.9in
Multi pack weight
15kg / 33lb
Frequency Response and Impedance curves
Topmost curve: Frequency Response on axis | Secondary curve: Frequency Response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Xmax: 0.5*(Hvc-Hg) + 0.25*Hg
Parameters: Measured after unit subjected to pre-conditioning signal.
Watch
AN Series Features
