CDX1-1010
1-inch exit ferrite magnet compression driver
- 2,200Hz recommended min. crossover freq (12dB/oct)
- Single piece PETP diaphragm and surround
Specifications
30W
Continuous power rating
107dB
Sensitivity
1in
Voice coil diameter
Power rating
15W
Continuous power rating
30W
Rated impedance
8Ω
Sensitivity
107dB
Frequency range
1500-20,000Hz
Recommended min. crossover (12dB/oct)
2200Hz
Magnet type
Ferrite
Voice coil diameter
25mm / 1in
Voice coil material
Copper clad aluminium
Diaphragm material
PETP film
Surround material
PETP film
Mounting Information
Width
90mm / 3.5in
Depth
52.8mm / 2.1in
Fitting
Screw (35mm/1.38in diameter)
Throat exit
25mm / 1in
Unit weight
0.8kg / 1.8lb
Packed Dimensions & Weight
Single pack size W x D x H
113mm x 103mm x 72mm / 4.4in x 4.0in x 2.8in
Single pack weight
1.1kg / 2.4lb
Multi pack qty
16
Multi pack size W x D x H
480mm x 480mm x 75mm / 18.9in x 18.9in x 2.95in
Multi pack weight
15kg / 33lb
Horns
T5951
H1SC-9050 Horn
T5952
H1SC-7050 Horn
Frequency Response and Impedance Curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.
