CDX1-1412
1-inch exit neodymium magnet compression driver
- Very compact design for highly portable applications
- 2,000Hz recommended min. crossover freq (12dB/oct)
- Single piece polyimide film diaphragm and surround
Specifications
70W
Continuous power rating
106dB
Sensitivity
1.4in
Voice coil diameter
Power rating
35W
Continuous power rating
70W
Rated impedance
8Ω
Sensitivity
106dB
Frequency range
1500-20,000Hz
Recommended min. crossover (12dB/oct)
2000Hz
Magnet type
Neodymium
Voice coil diameter
35mm / 1.4in
Voice coil material
Copper clad aluminium
Diaphragm material
Polyimide
Surround material
Polyimide
Additional impedances
16Ω
Mounting Information
Width
60mm / 2.4in
Depth
34.5mm / 1.4in
Fitting
Bolt (2x M5 holes on 52mm/2.05in PCD)
Throat exit
25mm / 1in
Unit weight
0.36kg / 0.8lb
Packed Dimensions & Weight
Single pack size W x D x H
99mm x 99mm x 70mm / 3.9in x 3.9in x 2.75in
Single pack weight
0.35kg / 0.77lb
Multi pack qty
24
Multi pack size W x D x H
360mm x 220mm x 170mm / 14.2in x 8.7in x 6.7in
Multi pack weight
9kg / 19.8lb
Frequency Response and Impedance Curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.
