CDX1-1415
1-inch exit neodymium magnet compression driver
- Aluminium diaphragm with elastomer surround
- Copper inductance sleeve for improved HF performance
- 2,500Hz recommended min. crossover freq (12dB/oct)
Specifications
40W
Continuous power rating
104dB
Sensitivity
1.4in
Voice coil diameter
Power rating
20W
Continuous power rating
40W
Rated impedance
8Ω
Sensitivity
104dB
Frequency range
2000-20,000Hz
Recommended min. crossover (12dB/oct)
2500Hz
Magnet type
Neodymium
Voice coil diameter
35mm / 1.4in
Voice coil material
Copper clad aluminium
Diaphragm material
Aluminium
Surround material
Elastomer
Mounting Information
Width
90mm / 3.5in
Depth
57mm / 2.2in
Fitting
Bolt (2 x M6 holes on 76mm/3.0in PCD)
Throat exit
25mm / 1in
Unit weight
0.25kg / 0.6lb
Packed Dimensions & Weight
Single pack size W x D x H
90mm x 90mm x 60mm / 3.5in x 3.5in x 2.4in
Single pack weight
0.5kg / 1.1lb
Multi pack qty
24
Multi pack size W x D x H
250mm x 350mm x 290mm / 9.8in x 13.8in x 11.4in
Multi pack weight
7kg / 14.5lb
Horns and repair kits
T5503
Diaphragm repair kit (8Ω)
T5359
H1-9040P Horn
T5134
H1-7050 'No Bell' Horn
Frequency Response and Impedance Curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.
