CDX1-1430
2,500Hz recommended min. crossover freq (12dB/oct)
Aluminium diaphragm with elastomer surround
Copper Inductance sleeve for improved HF performance
Specifications
50W
Nominal Power Rating
108dB
Sensitivity
35mm/1.4in
Voice coil diameter
Power Rating
50W
Continuous Power Rating
100W
Rated Impedance
8Ω
Sensitivity
108dB
Frequency Range
2000Hz-20,000Hz
Recommended min. crossover (12dB/oct)
2500Hz
Magnet Type
Neodymium
Voice Coil Diameter
35mm
Voice Coil Material
Copper clad aluminium
Diaphragm Material
Aluminium
Surround Material
Elastomer
Width
90mm / 3.5in
Depth
58mm / 2.3in
Fitting
Bolt (2 x M6 holes on 76mm, 3.0in PCD)
Throat Exit
25mm / 1.0in
Repair Kit 1 (Part Number)
T5503
Repair Kit 1 (Description)
Diaphragm repair kit (8Ω)
Horn 1 (Part Number)
T5359
Horn 1 (Description)
H1-9040P
Horn 2 (Part Number)
T5134
Horn 2 (Description)
H1-7050 'No Bell'
Mounting Information
Width
90mm/3.5in
Depth
58mm/2.3in
Unit Weight
0.47kg/1lb
Fitting
Bolt (2 x M6 holes on 76mm, 3.0in PCD)
Throat Exit
25mm/1.0in
Packed Dimensions & Weight
Single pack size W x D x H
90mm x 90mm x 60mm/3.5in x 3.5in x 2.4in
Single pack weight
0.6kg/1.3lb
Multi Pack Qty
24
Multi pack size W x D x H
345mm x 370mm x 245mm/13.6in x 14.6in x 9.6in
Multi pack weight
12.5kg/28lb
Diaphragm Material
Aluminium
Diaphragm Material
Elastomer
Frequency Response and Impedance curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power Rating: Tested for two hours on plane wave tube using continuous band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous Power Rating is defined as 3dB greater than the AES rating.
Sensitivity measured on axis at 1W/1m, using typical horn, in 2Π anechoic environment.