CDX1-1440
1-inch exit ferrite magnet compression driver
- Single piece Titanium diaphragm and surround
- Integrated diaphragm and rear cover for ease of replacement
- 2,200Hz recommended min. crossover freq (12dB/oct)
Specifications
50W
Continuous power rating
106dB
Sensitivity
1.4in
Voice coil diameter
Power rating
25W
Continuous power rating
50W
Rated impedance
8Ω
Sensitivity
106dB
Frequency range
1500-20,000Hz
Recommended min. crossover (12dB/oct)
2200Hz
Magnet type
Ferrite
Voice coil diameter
35mm / 1.4in
Voice coil material
Copper clad aluminium
Diaphragm material
Titanium
Surround material
Titanium
Mounting Information
Width
90mm / 3.5in
Depth
46.5mm / 1.8in
Fitting
Bolt (4 x M6 holes on 76mm/3in PCD)
Throat exit
25mm / 1in
Unit weight
1.0kg / 2.2lb
Packed Dimensions & Weight
Multi pack qty
16
Multi pack size W x D x H
495mm x 495mm x 90mm / 19.5in x 19.5in x 3.5in
Multi pack weight
17kg / 37.4lb
Horns and repair kits
T5580
Diaphragm repair kit (8Ω)
T5359
H1-9040P Horn
T5134
H1-7050 'No Bell' Horn
Frequency Response and Impedance Curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.