CDX1-1720
1-inch exit neodymium magnet compression driver
- Maximum modal suppression phase plug
- Deep-drawn titanium diaphragm with polyimide surround
- 1,500Hz recommended min. crossover freq (12dB/oct)
Specifications
100W
Continuous power rating
107dB
Sensitivity
1.75in
Voice coil diameter
Power rating
50W
Continuous power rating
100W
Rated impedance
8Ω
Sensitivity
107dB
Frequency range
800-20,000Hz
Recommended min. crossover (12dB/oct)
1500Hz
Magnet type
Neodymium
Voice coil diameter
44mm / 1.75in
Voice coil material
Edgewound copper clad aluminium
Diaphragm material
Titanium
Surround material
Polyimide
Mounting Information
Width
88.5mm / 3.5in
Depth
55mm / 2.2in
Fitting
Bolt (4 x M6 holes on 76mm/3in PCD)
Throat exit
25mm / 1in
Unit weight
0.65kg / 1.4lb
Packed Dimensions & Weight
Single pack size W x D x H
90mm x 90mm x 60mm / 3.5in x 3.5in x 2.4in
Single pack weight
0.75kg / 1.7lb
Multi pack qty
16
Multi pack size W x D x H
500mm x 485mm x 110mm / 19.7in x 19.1in x 4.3in
Multi pack weight
11.2kg / 24.9lb
Horns and repair kits
T5555
Diaphragm repair kit (8Ω)
T5359
H1-9040P Horn
T5134
H1-7050 ‘No Bell’ Horn
Frequency Response and Impedance Curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.
