CDX1-1742
1-inch exit ferrite magnet compression driver
- Single piece polyimide diaphragm and surround
- Next generation Sound Castle soft clamping diaphragm assembly
- 2,000Hz recommended min. crossover freq (12dB/oct)
Specifications
100W
Continuous power rating
107dB
Sensitivity
1.75in
Voice coil diameter
Power rating
50W
Continuous power rating
100W
Rated impedance
8Ω
Sensitivity
107dB
Frequency range
1200-20,000Hz
Recommended min. crossover (12dB/oct)
2000Hz
Magnet type
Ferrite
Voice coil diameter
44mm / 1.75in
Voice coil material
Edgewound copper clad aluminium
Diaphragm material
Polyimide
Surround material
Polyimide
Mounting Information
Width
100mm / 4.0in
Depth
53.5mm / 2.1in
Fitting
Bolt (2/3 M6 holes on 76/57mm, 3.0/2.24in PCD)
Throat exit
25mm / 1in
Unit weight
1.4kg / 3.1lb
Packed Dimensions & Weight
Single pack size W x D x H
140mm x 170mm x 70mm / 5.5in x 6.7in x 2.8in
Single pack weight
2kg / 4.4lb
Multi pack qty
16
Multi pack size W x D x H
495mm x 495mm x 90mm / 19.5in x 19.5in x 3.5in
Multi pack weight
26kg / 57.2lb
Horns and repair kits
T5572
Diaphragm repair kit (8Ω
T5359
H1-9040P Horn
T5134
H1-7050 'No Bell' Horn
Frequency and Response and Impedance Curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.
