CDX14-2410
1.4-inch exit ferrite magnet compression driver
- Maximum modal suppression phase plug
- Deep-drawn titanium diaphragm with polyimide surround
- 1,200Hz recommended min. crossover freq (12dB/oct)
Specifications
100W
Continuous power rating
106dB
Sensitivity
2.4in
Voice coil diameter
Power rating
50W
Continuous power rating
100W
Rated impedance
8Ω
Sensitivity
106dB
Frequency range
800-20,000Hz
Recommended min. crossover (12dB/oct)
1200Hz
Magnet type
Ferrite
Voice coil diameter
60mm / 2.4in
Voice coil material
Edgewound copper clad aluminium
Diaphragm material
Titanium
Surround material
Polyimide
Additional impedances
16Ω
Mounting Information
Width
145mm / 5.7in
Depth
70mm / 2.75in
Fitting
Bolt (4 x M6 holes on 102mm/4in PCD)
Throat exit
35mm / 1.4in
Unit weight
3.3kg / 7.2lb
Packed Dimensions & Weight
Single pack size W x D x H
170mm x 140mm x 75mm / 6.7in x 5.5in x 3in
Single pack weight
1.8kg / 3.9lb
Multi pack qty
6
Multi pack size W x D x H
500mm x 365mm x 90mm / 19.7in x 14.4in x 3.5in
Multi pack weight
11.5kg / 25.3lb
Repair kits
T6510
Diaphragm repair kit (8Ω)
T5548
Diaphragm repair kit (16Ω)
Frequency Response and Impedance Curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.
