CDX14-3030
1.4-inch exit ferrite magnet compression driver
- Single piece titanium diaphragm and surround
- 1,000Hz recommended min. crossover freq (12dB/oct)
Specifications
200W
Continuous power rating
106.5dB
Sensitivity
3in
Voice coil diameter
Power rating
100W
Continuous power rating
200W
Rated impedance
8Ω
Sensitivity
106.5dB
Frequency range
500-20,000Hz
Recommended min. crossover (12dB/oct)
1000Hz
Magnet type
Ferrite
Voice coil diameter
75mm / 3in
Voice coil material
Edgewound copper clad aluminium
Diaphragm material
Titanium
Surround material
Titanium
Mounting Information
Width
180mm / 7.0in
Depth
68.0mm / 2.7in
Fitting
Bolt (4 x M6 holes on a 102mm/4in PCD)
Throat exit
35mm / 1.4in
Unit weight
4.9kg / 10.7lb
Packed Dimensions & Weight
Single pack size W x D x H
214mm x196mm x 82mm / 8.4in x 7.7in x 3.2in
Single pack weight
5.1kg / 11.2lb
Repair kits
T6509
Diaphragm repair kit (8Ω)
Frequency Response and Impedance Curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.
