CDX14-3040
1.4-inch exit neodymium magnet compression driver
- 1,000Hz recommended min. crossover freq (12dB/oct)
- Single piece titanium diaphragm and surround
Specifications
150W
Continuous power rating
106.5dB
Sensitivity
3in
Voice coil diameter
Power rating
75W
Continuous power rating
150W
Rated impedance
8Ω
Sensitivity
106.5dB
Frequency range
500-18,000Hz
Recommended min. crossover (12dB/oct)
1000Hz
Magnet type
Neodymium
Voice coil diameter
75mm / 3in
Voice coil material
Edgewound copper clad aluminium
Diaphragm material
Titanium
Surround material
Titanium
Additional impedances
16Ω
Mounting Information
Width
135mm / 5.3in
Depth
68mm / 2.7in
Fitting
Bolt (4 x M6 holes on 102mm/4in PCD)
Throat exit
35mm / 1.4in
Unit weight
1.4kg / 3.1lb
Packed Dimensions & Weight
Single pack size W x D x H
170mm x 140mm x 75mm / 6.7in x 5.5in x 3.0in
Single pack weight
1.7kg / 3.7lb
Repair kits
T6539
Diaphragm repair kit (8Ω)
Frequency Response and Impedance Curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.
