CDX14-3060
1.4-inch exit ferrite magnet compression driver
Legacy Product
- 1,000Hz recommended min. crossover freq (12dB/oct)
- Maximum modal suppression phase plug
- Deep – drawn titanium diaphragm with ployimide surround
Specifications
150W
Continuous power rating
8Ω
Rated impedance
106.5dB
Sensitivity
Power rating
75W
Continuous power rating
150W
Rated impedance
8Ω
Sensitivity
106.5dB
Frequency range
500-18000Hz
Recommended min. crossover (12dB/oct)
1000Hz
Magnet type
Ferrite
Voice coil diameter
75mm / 3in
Voice coil material
Edgewound copper clad aluminium
Diaphragm material
Titanium
Surround material
Polyimide
Mounting Information
Width
180mm / 7.0in
Depth
71mm / 2.8in
Fitting
Bolt (4 x M6 holes on a 102mm/4in PCD)
Throat exit
35mm / 1.4in
Unit weight
4.9kg / 10.7lb
Packed Dimensions & Weight
Single pack size W x D x H
214mm x 196mm x 82mm / 8.4in x 7.7in x 3.2in
Single pack weight
5.1kg / 11.2lb
Repair kits
T5526
Diaphragm repair kit (8Ω)
Frequency Response and Impedance Curves
Measured - Plane Wave Tube
Measured - Exponential Horn 90° x 40° radiation pattern
Power rating: Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment.
