CN0515M
5-inch cast aluminium chassis, neodymium magnet midrange driver
- Inverted dustcap for close positioning of phase plug
- Compact, high flux, Dual Magnet Motor design
- Chassis design allows for fixing or rear cover
Specifications
200W
Continuous power rating
98dB
Sensitivity
1.5in
Voice coil diameter
Nominal diameter
125mm / 5in
Power rating
100W
Continuous power rating
200W
Rated impedance
16Ω
Sensitivity
98dB
Frequency range
200-8000Hz
Chassis type
Cast aluminium
Magnet type
Neodymium
Voice coil diameter
38mm / 1.5in
Voice coil material
Copper clad aluminium
Former material
Aluminium
Cone material
Cellulose
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
7mm / 0.28in
VC winding height (Hvc)
10mm / 0.39in
Parameters
Sd
78.54cm2/12.17in2
Fs
189.2Hz
Mms
9.11g / 0.32oz
Qms
1.534
Qes
0.337
Qts
0.276
Re
11.47Ω
Vas
0.68 / 0.02ft3
BI
19.19Tm
Cms
0.08mm/N
Rms
7.06kg/s
Xmax
3.25mm / 0.13in
Mounting Information
Overall diameter
155mm / 6.1in
Overall depth
73mm / 4.6in
Cut-out diameter
116mm / 5.9in
Mounting hole dimensions
5.2mm / 0.2in Ø
Number of mounting holes
4
Mounting hole PCD
142mm / 5.6in
Unit weight
1.12kg / 2.5lb
Packed Dimensions & Weight
Multi pack qty
12
Multi pack size W x D x H
420mm x 270mm x 190mm / 16.5in x 10.6in x 7.5in
Multi pack weight
14.5kg / 32lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: 0.5*(Hvc-Hg) + 0.25*Hg
