CN0617M
Inverted dustcap for close positioning of phase plug.
High temperature environmentally robust foam surround.
Copper sleeved pole to reduce distortion.
Chassis design allows for fixing of rear cover
Specifications
200W
Nominal Power Rating
99dB
Sensitivity
1.75in
Voice Coil Diameter
Nominal Diameter
165mm/6.5in
Power Rating
200W
Continuous Power Rating
400W
Sensitivity
99dB
Rated Impedance
16Ω
Frequency Range
300Hz-7000Hz
Voice Coil Diameter
44mm
Chassis Type
Cast aluminium
Magnet Type
Neodymium
Voice Coil Material
Edgewound copper clad aluminium
Former Material
Glass fibre
Cone Material
Kevlar loaded paper
Surround Material
Temperature resistant foam
Suspension
Single
Xmax
1.2mm/0.05in
Gap Depth
6mm/0.24in
Voice Coil Winding Width
8.4mm/0.33in
Small Signal Parameters
Sd
153.94cm2/23.86in2
Fs
197.50Hz
Qms
5.641
Qes
0.550
Qts
0.501
Re
12.85Ω
BI
17.65Tm
Cms
0.06mm/N
Rms
2.36kg/s
Mounting Information
Overall Diameter (mm)
189mm (max)
Overall Diameter (in)
7.44in (max)
Overall Depth
68mm/2.68in
Cut-out Diameter
150mm/5.9in
Mounting Slot Dimensions
7.5mm x 5.5mm/0.3in x 0.22in Ø
Number of Mounting Slots
4
Unit Weight
1.1kg/2.4lb
Mounting slot PCD
173mm-175mm/6.81in-6.89in
Packed Dimensions & Weight
Multi Pack Qty
8
Multi pack size W x D x H
350mm x 350mm x 190mm/13.7in x 13.7 x 7.4in
Multi pack weight
10kg/22lb
Diaphragm Material
Temperature resistant foam
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power Rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous Power Rating is defined as 3dB greater than the AES rating.
Sensitivity measured on axis at 1W, 1m in 2Π anechoic environment.
Xmax is derived from: (voice coil winding width-gap depth)/2.
Small Signal Parameters are measured after unit subjected to pre-conditioning signal.