CN1025B
10-inch cast aluminium chassis, neodymium magnet mid/bass driver
Legacy Product
- Inverted dustcap for closer positioning of phase plug
- Balanced Airflow Venting provides enhanced cooling
Specifications
10in
Diameter
500W
Continuous power rating
16Ω
Rated impedance
99dB
Sensitivity
Nominal diameter
254mm / 10in
Power rating
250W
Continuous power rating
500W
Rated impedance
16Ω
Sensitivity
99dB
Frequency range
60-5000Hz
Chassis type
Cast aluminium
Magnet type
Neodymium
Voice coil diameter
64mm / 2.5in
Voice coil material
Copper clad aluminium
Former material
Glass fibre
Cone material
Treated paper
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
8mm / 0.31in
VC winding height (Hvc)
12.2mm / 0.49in
Parameters
Sd
346.36cm2 / 53.69in2
Fs
79.50Hz
Mms
31.45g / 1.11oz
Qms
3.27
Qes
0.409
Qts
0.364
Re
10.76Ω
Vas
21.65I / 0.75ft3
BI
20.31Tm
Cms
0.13mm/N
Rms
4.81kg/s
Le (at 1kHz)
0.75mH
Xmax
2.1mm / 0.08in
Mounting Information
Overall diameter
265mm / 10.4in
Overall depth
119mm / 4.7in
Cut-out diameter
233mm / 9.2in
Mounting hole dimensions
8x6.5mm / 0.3x0.25in
Number of mounting holes
8
Mounting hole PCD
244.5-247mm / 9.63-9.73in
Unit weight
2.96kg / 6.5lb
Packed Dimensions & Weight
Multi pack qty
80
Multi pack size W x D x H
970mm x 1070mm x 850mm / 38.1in x 42.1in x 33.4in
Multi pack weight
257kg / 565lb
Frequency Response and Impedance Curves
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: Hvc-Hg/2
