FTR10-2055D (Legacy)
10-inch, cast aluminium chassis, ferrite magnet mid/bass driver
OEM Only
Legacy Product
- 10in cast aluminium chassis mid/bass driver provides 400W continuous power handling and 94dB sensitivity
Specifications
10in
Diameter
400W
Continuous power rating
8Ω
Rated impedance
93.5dB
Sensitivity
Nominal diameter
254mm / 10in
Power rating
200W
Continuous power rating
400W
EIA power rating
350W
Rated impedance
8Ω
Sensitivity
93.5dB
Frequency range
60-4000Hz
Chassis type
Cast aluminium
Magnet type
Ferrite
Magnet weight
1.3kg / 36oz
Voice coil diameter
50mm / 2in
Voice coil material
Round copper
Former material
Glass fibre
Cone material
Kevlar loaded paper
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
8mm / 0.33in
VC winding height (Hvc)
16mm / 0.63in
Parameters
Sd
346.36cm2 / 53.69in2
Fs
57.50Hz
Mms
35.19g / 1.24oz
Qms
2.734
Qes
0.392
Qts
0.343
Re
5.88Ω
Vas
36.91I / 1.30ft3
BI
13.81Tm
Cms
0.22mm/N
Rms
4.65kg/s
Le (at 1kHz)
0.46mH
Xmax
4mm / 0.16in
Mounting Information
Overall diameter
260mm / 10.2in
Overall depth
112mm / 4.4in
Cut-out diameter
232mm / 9.1in
Mounting hole dimensions
6.5x7.5mm / 0.26x0.29in
Number of mounting holes
8
Mounting hole PCD
244-247mm / 9.6-9.7in
Unit weight
4kg / 8.8lb
Packed Dimensions & Weight
Multi pack qty
36
Multi pack size W x D x H
1080mm x 960mm x 890mm / 42.5in x 37.8in x 35in
Multi pack weight
175kg / 385lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: Hvc-Hg/2