FTR18-4080F (Legacy)
18-inch, cast aluminium chassis, ferrite magnet LF driver
- Glass loaded paper cone with weather-resistant impregnation
- Airflow vented magnet assembly for dynamic heat dispersion
Specifications
18in
Diameter
1200W
Continuous power rating
8Ω
Rated impedance
97dB
Sensitivity
Nominal diameter
457mm / 18in
Power rating
600W
Continuous power rating
1200W
EIA power rating
800W
Rated impedance
8Ω
Sensitivity
97dB
Frequency range
30-3000Hz
Chassis type
Cast aluminium
Magnet type
Ferrite
Magnet weight
3.1kg / 110oz
Voice coil diameter
100mm / 4in
Voice coil material
Round copper
Former material
Glass fibre
Cone material
Glass loaded paper (weather-resistant)
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
10mm / 0.39in
VC winding height (Hvc)
22mm / 0.87in
Parameters
Sd
1134.12cm2 / 175.79in2
Fs
32.50Hz
Mms
155.60g / 5.49oz
Qms
4.334
Qes
0.335
Qts
0.311
Re
5.32Ω
Vas
281.30I / 9.93ft3
BI
22.48Tm
Cms
0.15mm/N
Rms
7.34kg/s
Le (at 1kHz)
1.25mH
Xmax
6mm / 0.24in
Mounting Information
Overall diameter
452mm / 17.8in
Overall depth
205mm / 8.1in
Cut-out diameter
416mm / 16.38in
Mounting hole dimensions
10x7mm / 0.39x0.27in
Number of mounting holes
8
Mounting hole PCD
429-440mm / 16.89-17.32in
Unit weight
9.7kg / 21.4lb
Packed Dimensions & Weight
Single pack size W x D x H
500mm x 500mm x 240mm / 19.7in x 19.7in x 9.4in
Single pack weight
11.4kg / 25.1lb
Multi pack qty
24
Multi pack size W x D x H
1210mm x 1050mm x 980mm / 47.6in x 41.3in x 35.4in
Multi pack weight
265kg / 580lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: Hvc-Hg/2
