NTR06-17X
Copper sleeved pole to reduce distortion
Vented magnet assembly for more efficient cooling
Sculpted elastomer surround for improved modal distribution
Specifications
150W
Nominal Power Rating
93.5dB
Sensitivity
1.75in
Voice coil diameter
Nominal Diameter
165mm/6.5in
Nominal Power Rating
150W
Continuous Power Rating
300W
Sensitivity
93.5dB
Rated Impedance
8Ω
Frequency Range
70Hz-5000Hz
Voice coil diameter (mm)
44mm
Voice coil diameter (in)
1.75in
Chassis Type
Cast aluminium
Magnet Type
Neodymium
Voice coil material
Copper clad aluminium
Former Material
Polyimide
Cone material
Kevlar loaded paper (weather-resistant)
Surround Material
Elastomer
Suspension
Single
Xmax
3mm/0.12in
Gap Depth
6mm/0.24in
Voice coil winding width
12mm/0.47in
Small Signal Parameters
Sd
153.94cm2/23.86in2
Fs
60.40Hz
Mms
17.68g/0.62oz
Qms
7.247
Qes
0.335
Qts
0.321
Re
5.36Ω
Vas
13.19L/0.47ft3
BI
10.36Tm
Cms
0.39mm/N
Rms
0.93kg/s
Le (at 1kHz)
0.28mH
Mounting Information
Mounting slot dimensions
10mm/0.39in Ø
Mounting slot PCD
170mm/6.7in
Number of mounting slots
4
Overall Depth
73mm/2.87in
Overall Diameter (mm)
189mm (max)
Overall Diameter (in)
189in (max)
Cut-out diameter
145mm/5.7in
Unit Weight
1.2kg/2.64lb
Packed Dimensions & Weight
Multi Pack Qty
8
Multi pack size W x D x H
350mm x 350mm x 190mm/13.7in x 13.7in x 7.4in
Multi pack weight
11kg/25lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power Rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous Power Rating is defined as 3dB greater than the AES rating.
Sensitivity measured on axis at 1W, 1m in 2Π anechoic environment.
Xmax is derived from: (voice coil winding width-gap depth)/2.
Small Signal Parameters are measured after unit subjected to pre-conditioning signal.