TF0510
5-inch pressed steel chassis, ferrite magnet mid/bass driver
Specifications
60W
Continuous power rating
91dB
Sensitivity
1in
Voice coil diameter
Nominal diameter
127mm / 5in
Power rating
30W
Continuous power rating
60W
EIA power rating
50W
Rated impedance
8Ω
Sensitivity
91dB
Frequency range
130-8000Hz
Chassis type
Pressed steel
Magnet type
Ferrite
Magnet weight
0.37kg / 13oz
Voice coil diameter
25mm / 1in
Voice coil material
Round copper
Former material
Polyimide
Cone material
Kevlar loaded paper
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
5mm / 0.2in
VC winding height (Hvc)
7.3mm / 0.29in
Parameters
Sd
78.54cm2 / 12.17in2
Fs
128.10Hz
Mms
7.02g / 0.25oz
Qms
2.376
Qes
0.768
Qts
0.580
Re
6.32Ω
Vas
7.38l / 0.26ft3
BI
6.82Tm
Cms
0.22mm/N
Rms
2.38kg/s
Le (at 1kHz)
0.33mH
Xmax
2.4mm / 0.09in
Mounting Information
Overall diameter
136x151mm / 5.35x5.94in
Overall depth
68mm / 2.7in
Cut-out diameter
117mm / 4.61in
Mounting hole dimensions
4.5mm / 0.18in Ø
Number of mounting holes
4
Mounting hole PCD
140mm / 5.51in
Unit weight
1.0kg / 2.2lb
Packed Dimensions & Weight
Single pack size W x D x H
170mm x 180mm x 70mm / 6.7in x 7.1in x 2.8in
Single pack weight
1.5kg / 3.3lb
Multi pack qty
12
Multi pack size W x D x H
320mm x 550mm x 190mm / 12.6in x 21.7in x 7.5in
Multi pack weight
15kg / 33lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: 0.5*(Hvc-Hg) + 0.25*Hg
