TF1020
10in mid bass driver provides 97dB sensitivity and 150Wrms
Specifications
150W
Nominal Power Rating
97dB
Sensitivity
2in
Voice Coil Diameter
Nominal Diameter
254mm/10in
Power Rating
150W
Continuous Power Rating
300W
Sensitivity
97dB
Rated Impedance
8Ω
Frequency Range
60Hz-6000Hz
Voice Coil Diameter
50mm
Chassis Type
Pressed steel
Magnet Type
Ferrite
Magnet Weight
1.2kg/42oz
Voice Coil Material
Round copper
Former Material
Polyimide
Cone Material
Kevlar loaded paper
Surround Material
Cloth-sealed
Suspension
Single
Xmax
2mm/0.08in
Gap Depth
8mm/0.31in
Voice Coil Winding Width
12mm/0.47in
Additional Impedances
4
Small Signal Parameters
Sd
346.36cm2/53.69in2
Fs
69.40Hz
Mms
31.10g/1.10oz
Qms
2.454
Qes
0.372
Qts
0.323
Re
5.45Ω
Vas
28.75L/1.02ft3
BI
14.10Tm
Cms
0.17mm/N
Rms
5.52kg/s
Le (at 1kHz)
0.60mH
Mounting Information
Overall Diameter (mm)
256mm
Overall Diameter (in)
10.08in
Overall Depth
110mm/4.33in
Cut-out Diameter
229mm/9.02in
Mounting Slot Dimensions
8mm x 6mm/0.31in x 0.24in Ø
Number of Mounting Slots
4
Unit Weight
3.7kg/8.2lb
Mounting slot PCD
245mm/9.65in
Packed Dimensions & Weight
Single pack size W x D x H
280mm x 280mm x 120mm/11.0in x 11.0in x 4.7in
Single pack weight
4.2kg/9.2lb
Multi Pack Qty
96
Multi pack size W x D x H
1080mm x 880mm x 840mm/42.5in x 34.6in x 33.1in
Multi pack weight
390kg/860lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power Rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous Power Rating is defined as 3dB greater than the AES rating.
Sensitivity measured on axis at 1W, 1m in 2Π anechoic environment.
Xmax is derived from: (voice coil winding width-gap depth)/2.
Small Signal Parameters are measured after unit subjected to pre-conditioning signal.