TF1225e
12-inch pressed steel chassis, ferrite magnet bass/mid driver
- 12in mid/bass driver with extended low frequency response
Specifications
600W
Continuous power rating
96dB
Sensitivity
2.5in
Voice coil diameter
Nominal diameter
305mm / 12in
Power rating
300W
Continuous power rating
600W
EIA power rating
450W
Rated impedance
8Ω
Sensitivity
96dB
Frequency range
50-3000Hz
Chassis type
Pressed steel
Magnet type
Ferrite
Magnet weight
1.4kg / 50oz
Voice coil diameter
64mm / 2.5in
Voice coil material
Edgewound copper
Former material
Polyimide
Cone material
Kevlar loaded paper
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
8mm / 0.31in
VC winding height (Hvc)
14.5mm / 0.57in
Parameters
Sd
530.93cm2 / 82.29in2
Fs
52.60Hz
Mms
54.04g / 1.91oz
Qms
3.513
Qes
0.368
Qts
0.333
Re
6.42Ω
Vas
67.71l / 2.39ft3
BI
17.66Tm
Cms
0.17mm/N
Rms
5.08kg/s
Le (at 1kHz)
1.32mH
Xmax
5.25mm / 0.21in
Mounting Information
Overall diameter
309mm / 12.17in
Overall depth
139mm / 5.5in
Cut-out diameter
283mm / 11.14in
Mounting hole dimensions
7.9mm / 0.31in Ø
Number of mounting holes
4
Mounting hole PCD
297mm / 11.69in
Unit weight
4.4kg / 9.7lb
Packed Dimensions & Weight
Single pack size W x D x H
330mm x 330mm x 150mm / 13in x 13in x 5.9in
Single pack weight
5.0kg / 11.0lb
Multi pack qty
60
Multi pack size W x D x H
1080mm x 980mm x 880mm / 42.5in x 38.6in x 34.6in
Multi pack weight
290kg / 638lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: 0.5*(Hvc-Hg) + 0.25*Hg