TF1230SL
12-inch pressed steel chassis, ferrite magnet bass/mid driver
- Airflow vented magnet assembly for dynamic heat dispersion
- Compact high flux Dual Magnet Motor design
Specifications
700W
Continuous power rating
97dB
Sensitivity
3in
Voice coil diameter
Nominal diameter
305mm / 12in
Power rating
350W
Continuous power rating
700W
EIA power rating
500W
Rated impedance
8Ω
Sensitivity
97dB
Frequency range
50-4000Hz
Chassis type
Pressed steel
Magnet type
Ferrite
Magnet weight
1.7kg / 60oz
Voice coil diameter
75mm / 3in
Voice coil material
Round copper
Former material
Polyimide
Cone material
Kevlar loaded paper
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
8mm / 0.31in
VC winding height (Hvc)
16mm / 0.63in
Additional impedances
4Ω
Parameters
Sd
530.93cm2 / 82.29in2
Fs
56.80Hz
Mms
58.32g / 2.06oz
Qms
3.635
Qes
0.437
Qts
0.390
Re
5.17Ω
Vas
53.76l / 1.90ft3
BI
15.68Tm
Cms
0.14mm/N
Rms
5.72kg/s
Le (at 1kHz)
0.89mH
Xmax
6mm / 0.24in
Mounting Information
Overall diameter
309mm / 12.17in
Overall depth
137mm / 5.4in
Cut-out diameter
283mm / 11.14in
Mounting hole dimensions
7.9mm / 0.31in Ø
Number of mounting holes
4
Mounting hole PCD
297mm / 11.68in
Unit weight
4.3kg / 9.5lb
Packed Dimensions & Weight
Multi pack qty
60
Multi pack size W x D x H
1080mm x 980mm x 880mm / 42.5in x 38.6in x 34.6in
Multi pack weight
285kg / 620lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: 0.5*(Hvc-Hg) + 0.25*Hg