NTR10-2520D (Legacy)
10-inch cast aluminium chassis, neodymium magnet mid/ bass driver
- Vented cast aluminium heatsink
- Compact high flux Dual Magnet Motor design
Specifications
10in
Diameter
500W
Continuous power rating
8Ω
Rated impedance
96dB
Sensitivity
Nominal diameter
254mm / 10in
Power rating
250W
Continuous power rating
500W
Rated impedance
8Ω
Sensitivity
96dB
Frequency range
55-3500Hz
Chassis type
Cast aluminium
Magnet type
Neodymium
Voice coil diameter
64mm / 2.5in
Voice coil material
Copper clad aluminium
Former material
Glass fibre
Cone material
Kevlar loaded paper
Surround material
Cloth-sealed
Suspension
Single
Gap height (Hg)
8mm / 0.32in
VC winding height (Hvc)
16mm / 0.63in
Parameters
Sd
346.36cm2 / 53.69in2
Fs
57.20Hz
Mms
37.93g / 1.34oz
Qms
2.824
Qes
0.322
Qts
0.289
Re
5.92Ω
Vas
34.69I / 1.23ft3
BI
15.83Tm
Cms
0.20mm/N
Rms
4.82kg/s
Le (at 1kHz)
0.49mH
Xmax
4mm / 0.16in
Mounting Information
Overall diameter
260mm / 10.24in
Overall depth
113mm / 4.45in
Cut-out diameter
232mm / 9.13in
Mounting hole dimensions
7.5x6.5mm / 0.3x0.26in
Number of mounting holes
4
Mounting hole PCD
244-247mm / 9.6-9.7in
Unit weight
2.2kg / 4.9lb
Packed Dimensions & Weight
Single pack size W x D x H
305mm x 305mm x 150mm / 12.0in x 12.0in x 5.9in
Single pack weight
2.5kg / 5.5lb
Multi pack qty
96
Multi pack size W x D x H
1080mm x 880mm x 840mm / 42.5in x 34.6in x 33.1in
Multi pack weight
235kg / 518lb
Frequency Response and Impedance Curves
Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis
Power rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.
Continuous power rating: Defined as 3dB greater than the AES rating.
Sensitivity: Measured on axis at 1W, 1m in 2π anechoic environment.
Parameters: Measured after unit subjected to pre-conditioning signal.
Xmax: Hvc-Hg/2