“Celestion drivers give every guitar player the best tone possible. They facilitate a magical interplay between the artist, the amplifier, and the tone of the speaker.”
Celestion have designed a slot ported reflex enclosure for use with the TSQ2460, our 24-inch neodymium magnet cast aluminium chassis low frequency driver. A ported or reflex cabinet is a simple box enclosure with one or more holes (ports) added on the front baffle. For most PA uses, this offers the best option for building […]
Building your own 1×12 guitar speaker cabinet is a rewarding project that allows plenty of scope for customisation and the great news is you don’t need to be an acoustic engineer to design a fantastic-sounding cabinet! While measurements like the Thiele-Small parameters (Vas, Qts, Fs, etc.) are crucial for high-fidelity audio or bass cabinets, guitar […]
Celestion has reinforced its position in the professional audio market with the introduction of two new 1.4-inch exit, neodymium magnet high-frequency compression drivers: the CDX14-3055 and CDX14-3045. These drivers are more than just updates; they represent a significant advancement in Celestion’s line of large-format compression drivers, offering pro-audio users enhanced performance and greater flexibility for […]
Loudspeaker cabinet designer Bill Fitzmaurice has designed a bass reflex cabinet, specifically for use with the Celestion TSQ1845, our 18-inch cast aluminium chassis neodymium magnet low frequency loudspeaker. Constructed from 12mm plywood, this design realises the maximum performance from the smallest and lightest cabinet possible. The TSQ1845 driver has a 4.5-inch diameter copper voice coil, […]
So you’ve built a beautiful cabinet and picked out some sweet speakers—now comes the wiring! Don’t overthink this part; it’s one of the easiest steps, but getting it right is crucial for killer tone and reliability. The Best Wire Type: Stranded Copper Forget solid core, shielded cable, or anything fancy. For internal wiring within your […]
“Our primary strength is our ability to achieve exceptional levels of accuracy in speakers. We set out to disrupt the status quo, and despite being a small team, we are executing at a very high level, leading to early success with high-end projects and rapid industry adoption.”
Loudspeaker cabinet designer Bill Fitzmaurice has designed a bass reflex cabinet, specifically for use with the Celestion TSQ2145, our 21-inch cast aluminium chassis neodymium magnet low frequency loudspeaker. Constructed from 12mm plywood that’s supported by bracing, the design offers a more lightweight solution to 18mm plywood, while being as structurally sound as a cabinet made […]
“This obsession with gear always has been to find something new to inspire you to come up with new ideas, and you never know where it can lead you.”
Over half a century from its original filming, Pink Floyd’s iconic concert film, Live at Pompeii, has been digitally re-mastered in 4K with a new high-resolution, Dolby Atmos audio mix by Steven Wilson. Thanks to the meticulous restoration efforts of author and audio historian, Chris Hewitt of CH Vintage Audio, a once in a lifetime […]
